Direct fit, bolt in replacement aluminum radiator for a 1959-1968 Austin Healey 3000. Complete with a Spal Pusher fran on the front of the radiator and the required electrical kit to get your fan up and running.
There is a fan guard mounted to the motor side face of the top tank of this radiator. (Like the original radiator)
This radiator is made with 2 rows of 1" tubes. That is equivalent to a 4 row copper brass radiator in terms of thickness, however it will actually cool like a 5 row copper brass. This is a SIGNIFICANT improvement over the original copper brass radiator. The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.
You should know that the filler neck on the top of this radiator is built to a current SAE (Standard Automotive Engineering) specification that is followed by many manufactures including Ford, GM, and Mopar. This design is different than the OEM fillerneck that was used by Austin Healey. You will be able to find filler caps to fit this radiator that will match the OEM 4lbs or 7 lbs requirement. "STANT" is one of the manufactures of these caps.