1966-1969 22" Core Mopar Aluminum Radiator (w/ 4- 9" Spal Low Profile fans)

(No reviews yet) Write a Review
Direct fit, bolt in replacement aluminum radiator for all 1966-1969 Mopar applications with a 22" wide core.
(Designed to fit the core supports with the 22" wide opening)
  • Direct fit radiator
  • (4) 9" Fans (2500 CFM)
  • 5"thick
  • 16 Fins per inch
  • Filler neck is machined from a solid aluminum billet
  • No epoxy, fully furnace brazed
  • Fully TIG welded
  • 100% MADE IN THE USA
Our Quad fan setup allows us to move a significant volume of air flow (roughly 2500 CFM) while keeping the package as thin as possible (as thin as 5").  Note that a single 16" fan moving the same same air volume would increase the overall package thickness by 1.5"....which would require more room that most of these Mopar applications have to offer.  The quad fan set on the bracket and on a shroud are our 2 most popular packages for this radiator.
The core for this custom built, high performance radiator features 2 rows of 1" tubes. The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.
This radiator is designed with the proper mounting point to attach the original plastic shroud. If, at any point you, decide to upgrade to any our aluminum shroud options you can simple bolt them to this radiator. All of our shrouding is designed to bold to our radiator using the same attachment points as the OEM fan shroud.
Visit our FAQ page to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other options.
Box Width:
7.00 (in)
Box Length:
24.00 (in)
Box Depth:
34.00 (in)
Thickness Of Radiator And/or Shroud, Fans:
Option 3:
Inlet Location:
Passenger Side
Outlet Location:
Driver Side
Option 1:
Fan Package: YES