Direct fit, bolt in replacement aluminum radiator for all MK1 Elise, MK2 Elise, MK1 Exige, MK2 Exige, 340R. Including cars with or without air conditioning.
- Direct fit radiator
- 16 Fins per inch
- No epoxy, fully furnace brazed
- Fully TIG welded
- 100% MADE IN THE USA
The core for this custom built, high performance radiator is 2.25" thick. (The stock OEM radiator has a 1 row core that is 1.25" thick (1.5" thick on the VX220 Turbo)) The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.
If you are looking for an easy install and a better cooling radiator than stock, then this is the radiator for you! We do consider this a Direct fit replacement, however due to the additional thickness of the radiator you will be required to remove some of the rubber casketing around the radiator and do some slight trimming on the plastic shrouding around the radiator.
*Important Installation Notes*
Visit our FAQ page
to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other options.
Doing the install on this radiator is more time consuming than doing an install of a factory replacement radiator. Keep in mind that this radiator is 3/4" thicker than the stock radiator. This radiator is the largest most efficient radiator on the market for this application. Due to the this additional thickness you should be aware that you may need to temporarily disconnect the A/C line and/or the oil cooler lines in order to install this radiator.
If you do not need the additional cooling of this radiator, you should consider our thinner version, 99053-100