Direct fit radiator, bolt in replacement radiator for a 1954-1962 TRIUMPH TR2/ TR3
Please notice that this radiator does not have the hole in the center of the core for the fan shaft.
- Direct fit radiator
- 16 Fins per inch
- Filler neck is machined from a solid aluminum billet
- No epoxy, fully furnace brazed
- Fully TIG welded
- 100% MADE IN THE USA
The core for this custom built, high performance radiator features 2 rows of 1" tubes. The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.
The original radiator cap will NOT fit the radiator neck on this new performance unit. The filler neck is built to SAE standards and fits SAE radiator caps. If you do not have a radiator cap that is built to a current SAE spec (similar to GM, Ford, Chrysler) you may want to consider adding one of the caps that we recommend down below in our "Related Items" section.
Visit our FAQ page
to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other options.
|MAKE ||MODEL ||YEAR ||TRANSMISSION |
|Triumph ||TR2 ||1954 ||M/T |
|Triumph ||TR2 ||1955 ||M/T |
|Triumph ||TR3 ||1956 ||M/T |
|Triumph ||TR3 ||1957 ||M/T |
|Triumph ||TR3A ||1958 ||M/T |
|Triumph ||TR3A ||1959 ||M/T |
|Triumph ||TR3A ||1960 ||M/T |
|Triumph ||TR3A ||1961 ||M/T |
|Triumph ||TR3B ||1962 ||M/T |