Image 1

1958-1960 Austin Healey Bugeye Sprite Aluminum Radiator

  • Product Information

    Direct fit, bolt in replacement aluminum radiator for a 1958-1960 Austin Healey Bugeye Sprite


    • Direct fit radiator
    • 16 Fins per inch
    • Filler neck is machined from a solid aluminum billet
    • No epoxy, fully furnace brazed
    • Fully TIG welded
    • 100% MADE IN THE USA

    The standard core for this custom built, high performance radiator features 1 rows of 1.5" tubes. 

    The current design that we build does have the appropriate mounting holes and weld nuts build in to the radiator. (the photo does not show this) 

    You should know that the filler neck on the top of this radiator is built to a current SAE (Standard Automotive Engineering) specification that is followed by many manufactures including Ford, GM, and Mopar. This design is different than the OEM fillerneck that was used by Austin Healey. You will be able to find filler caps to fit this radiator that will match the OEM 4lbs or 7 lbs requirement. "STANT" is one of the manufactures of these caps.
    Visit our FAQ page to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other option


    Austin Healey Sprite 1958 M/T
    Austin Healey Sprite 1959 M/T
    Austin Healey Sprite 1960 M/T
  • Product Reviews


    Write A Review

    1. Great results

      I purchased a radiator along with a cap and over-flow/recovering tank. The folks I dealt with were great, answered all my questions, offered assistance as needed. The fit was prefect, everything worked as promised. Just finished a 1,200 mile trip (this is July) and the running temps were between 10 and 20 degrees cooler than before. Never even close to overheating. on Jul 21st 2018

    2. 60 Bugeye

      I installed your radiator today and wanted to let you know that it arrived with no damage and went in flawlessly. It really looks great. With the way the car is made, if the hood is up the radiator is front and center and I know it will be noticed and envied. The weather here is cold and rainy so I won't be road testing it until spring but I'm confident that it will work as good as it looks. Thank you. on Dec 5th 2015

    3. 1958-1960 Radiator for 1962 Sprite

      For a couple of years I debated on what to do with my leaking radiator: repair or replace. I found three basic replacement options, order a direct replacement (poor fit and quality), order an aluminum radiator made in China through EBay (questionable quality), or order a quality aluminum radiator from Wizard. The Wizard radiator was a bit more expensive but I figured it will likely be the last one I buy so I spent a little more and ordered it. The radiator arrived in a large box, extremely well packaged to prevent any damage. When I opened the box I was immediately impressed with the build quality. It looked amazing - with perfect welds (It is a work of art). The installation was straight forward and the captive nuts were exactly where they needed to be‚ all perfect. Fit and finish is perfect. Thank you Wizard! on Nov 13th 2015

  • Find Similar Products by Category