Image 1

1972-77 TVR 2500M Aluminum Radiator

×
×
Rating:
Price:
$479.00
SKU:
99015-100
  • Product Information

    Direct fit, bolt in replacement aluminum radiator for the 1972-1977 TVR 2500M. This unit is 9" tall, 30.75" wide, and 3" thick.
     
    Inlet: 1.25"
     
    Outlet:1.25"
     
    • Direct fit radiator
    • 16 Fins per inch
    • Filler neck is machined from a solid aluminum billet
    • No epoxy, fully furnace brazed
    • Fully TIG welded
    • 100% MADE IN THE USA
     
    The standard core for this custom built, high performance radiator features 2 rows of 1" tubes. The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.
     
    This unit could potentially cover the 3000M as well. However if you are planning on putting this in the 3000 I would suggest that you call and review the design with one of our techs to insure that is is correct for your application.

     
    Visit our FAQ page to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other options.
     

    APPLICATION COVERAGE

    MAKE MODEL YEAR SUBMODEL TRANSMISSION
    TVR Griffith 1972 2500M M/T
    TVR Griffith 1973 2500M M/T
    TVR Griffith 1974 2500M M/T
    TVR Griffith 1975 2500M M/T
    TVR Griffith 1976 2500M M/T
    TVR Griffith 1977 2500M M/T
  • Product Reviews

    ×

    Write A Review

    1. 2500M Conversion to Al Radiator

      I have installed the Wizard Cooling Aluminum Radiator in my 74 TVR 2500M. It is a drop in replacement, but because the 2500M's were hand built, there were a few "very small" modifications to make things fit. The locating studs on the bottom of the radiator were a little too long and needed to be shortened to clear the bracket for the supporting the spare tire, and I had do cut out a small amount of the fiberglass wheel well to clear the top right side drain valve. I did the install with the bonnet in place. If I had removed it, the install would have been simpler, but I was on my own, and the bonnet is too heavy for me to deal with on my own, hence a little extra effort and scratches on my arms were the result.

      In addition to the Alum. radiator, I installed 2 fans on the rear of the radiator (same fans I had on the old radiator and still had overheating problems at ambient temps over 85 degrees F) and I converted to Evans Waterless Coolant.

      Bottom line, the radiator is well constructed and delivery was faster then expected. I am very happy with the results. With the Wizard Cooling Aluminum Radiator, fans and Evans Waterless Coolant, my engine temps are running at 185 degree F (controlled via 185 degree Thermostat) when driving at ambient temps in the high 80's. I will get to test it out driving in ambient temps in the 90's later this week, but I am confident it will perform well.

      I recommend this product to other TVR 2500M owners who are having overheating problems or need to replace their radiator .
      on Jul 6th 2016

    2. TVR Radiator

      Purchase was well worth it.....timely, perfect fit on Nov 13th 2015

  • Find Similar Products by Category

×
×