Image 1

1968-1974 Triumph TR6/ TR250 Aluminum Radiator with 16" Fan

  • Product Information

    Direct fit , bolt in replacment aluminum radiator for the 1968-74 Triumph TR6 and 250 with a 16" Low Profile fan.
    Package comes complete with all neccesary accessories for installation and fan set up. Including fan wiring kit and brass draincock. (Radiator cap is not included) 

    Total package thickness: 5"
    • Direct fit radiator
    • Single Fan on a Bracket
    • Fan Wiriing Harness
    • 16 Fins per inch
    • Filler neck is machined from a solid aluminum billet
    • No epoxy, fully furnace brazed
    • Fully TIG welded
    • 100% MADE IN THE USA

    Please notice that the upper hose connection on this radiator comes straight out. This is correct for the majority of the early TR6 radiators, however some of these vehicles have been know to have a late model version (with a 90 degree inlet) radiator installed. Please verify what version you have before making a purchase.

    The standard core for this custom built, high performance radiator features 2 rows of 1" tubes. The tubes are space 3/8" apart, on center. With 3/8" centers we are able to put more rows of tubes, fins, and coolant volume in the core as well as create more surface area for air to travel over; allowing for greater heat dissipation.


    Visit our FAQ page to learn more about the different core types, our construction process and why Wizard Cooling's products' performance is superior to the other options.


  • Product Reviews


    Write A Review

    1. TR6 Radiator - a beautiful work of art

      Even though I live in the UK, I ordered this Radiator for my 1970 TR6 as I had read good reviews about Wizard Cooling.
      Radiator was recently received after only several weeks, and that was mainly due to HM UK Customs holding things up !
      I must say the radiator looks amazing and really looks like a work of art as it is very well made.
      Combined with the attached Spal Electric Fan it will look great in my car.
      Scott and Dave have been really helpful with initial advise and then parcel tracking.
      Couldn't have asked for more and would easily recommend.
      Thanks again, Neil
      on Dec 1st 2017

    2. Shaun Carrig

      During the full off frame restoration of my TR6 I made a few upgrades to the suspension and engine. Well, after looking at all the shiny new stuff I decided to further enhance the look of the engine compartment and improve the cooling system. What better way than adding a new aluminum radiator. The fit was perfect, the workmanship supreme and the look is great. on Nov 13th 2015

    3. 1968-1974 TRIUMPH TR6/ TR250 Aluminum Radiator

      Excellent fitting. Haven't driven the old lady yet, but everything seems to work out (as far as I can see now). on Nov 13th 2015

  • Find Similar Products by Category