Comments: Fitment to original bolt holes was good which the radiator holes allows for some wiggle room. The motor side lip allowed enough room to mount a flush shroud to be mounted for a electric fan. The only thing that was different for my application was, I have a aftermarket aluminum water pump housing that has a 1 3/4" outlet. Had to buy a rubber adapter to go from the radiator
1 1/2" lower inlet to 1 3/4" for the hose. Seems to have heavier welds than my previous aluminum radiator.
(Thank you for the review Rick! This radiator is also available with a 1.75" Outlet. Depending on the motor you are running....it could go either way)
Critical thickness is the combined thickness of the radiator, shroud, and fans. (It
does not take into consideration any mounting bracket positioning, which may need to
be taken into consideration before checking out)
Total Reviews (1)
Reviewed by: RICK04/08/2019 04:45PM
Purchased from: Wizard Cooling
Comments:
Fitment to original bolt holes was good which the radiator holes allows for some wiggle room. The motor side lip allowed enough room to mount a flush shroud to be mounted for a electric fan. The only thing that was different for my application was, I have a aftermarket aluminum water pump housing that has a 1 3/4" outlet. Had to buy a rubber adapter to go from the radiator
1 1/2" lower inlet to 1 3/4" for the hose. Seems to have heavier welds than my previous aluminum radiator.
(Thank you for the review Rick! This radiator is also available with a 1.75" Outlet. Depending on the motor you are running....it could go either way)